2019 Toyota Tacoma Speaker Sizes and Audio System Guide
2019 Toyota Tacoma Speaker Sizes and Audio System Guide
This page covers the 2019 Toyota Tacoma factory speaker layout, common speaker locations, and notes to help you plan an upgrade. Equipment varies by trim, body style, and audio package, so speaker count and audio features can differ across models. The details here are based on generation data and should be verified before ordering, especially if your Tacoma has a higher-level audio setup.
Data verified by Nick Marchenko, PhD
Speaker Size Chart – 2019 Toyota Tacoma
Use this table as the main reference. Fitment depends on trim, factory audio package, mounting depth, and adapter availability.
| Location | Type | Factory Size | Note |
|---|---|---|---|
| Front Door | Full-Range | 6 x 9 inch | |
| Dash Corner | Mid-Range | 2.75 inch | |
| Rear Door | Full-Range | 6.75 inch | |
| Behind Seat | Full-Range | 8 inch |
Generic speaker location diagram. The table above shows the specific factory sizes for this vehicle. Exact location details may vary by body style and trim.
Recommended Speakers for the 2019 Toyota Tacoma
Selected aftermarket speakers that match the factory sizes for this vehicle. Always verify mounting depth, connector type, and audio package before ordering.
6.75" Speakers
8" Speakers
Disclosure: Product links are affiliate links. We may earn a commission at no extra cost to you.
Speaker Count by Trim – 2019 Toyota Tacoma
Speaker count and audio equipment vary by trim and factory audio package. This table lists known configurations from our database.
| Trim | Speakers | Amplifier | Radio | Navigation |
|---|---|---|---|---|
| Limited V6 4x2 Double Cab 127.4 in. WB | 7 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| Limited V6 4x4 Double Cab 127.4 in. WB | 7 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 4x2 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | – |
| SR5 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | – |
| SR5 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | – |
| SR5 V6 4x2 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x2 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x4 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x4 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Pro V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x2 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x2 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x4 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR 4x2 Access Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
| SR 4x2 Double Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
| SR 4x4 Access Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
| SR V6 4x2 Access Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
| SR V6 4x4 Access Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
| SR V6 4x4 Double Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
| SR V6 4x4 Double Cab 127.4 in. WB | 4 | – | AM/FM stereo, seek-scan | – |
Data sourced from manufacturer specifications. Verify with the window sticker or dealer before ordering audio components.
Vehicle and Audio System Specifications
This block helps identify the vehicle and its audio system configuration for fitment decisions.
What Speakers Fit the 2019 Toyota Tacoma?
Aftermarket fitment should start with the factory speaker locations listed for this 2019 Toyota Tacoma, but diameter alone is not enough. Based on generation data, the truck uses a mix of 6 x 9 inch front door, 2.75 inch dash corner, 6.75 inch rear door, and 8 inch behind-seat speaker locations. Factory audio equipment can vary by trim and package, so verify mounting depth, connector style, and whether your truck has a premium audio setup before ordering replacement speakers.
Usually Safe Upgrades
- If your vehicle uses the front door location, a 6 x 9 inch full-range speaker is the starting point for replacement selection.
- If your vehicle uses the dash corner location, a 2.75 inch mid-range speaker is the listed factory size to match.
- If your vehicle uses the rear door location, a 6.75 inch full-range speaker is the factory opening to compare against.
- If your vehicle uses the behind-seat location, an 8 inch full-range speaker is the listed size to check for compatibility.
- If equipped with a factory subwoofer or tweeters, those locations should be verified by trim and audio package before buying parts.
Check Before Buying
- Confirm the speaker location in your specific Tacoma, since 2019 speaker location data is based on generation information and should be verified before ordering.
- Measure mounting depth and check the speaker opening shape, not just the diameter.
- Match the connector type and wiring layout to your truck before choosing replacement speakers.
- Review your trim and audio package, because speaker count and factory audio equipment can vary from 4 to 7 speakers.
- If you are upgrading a premium system, verify the factory amplifier details by trim and audio package.
Installation Notes
The 2019 Toyota Tacoma uses different speaker layouts depending on trim and audio package, so verify your vehicle before ordering parts. Based on generation data, speaker locations can include 6 x 9 inch front door speakers, 2.75 inch dash corner speakers, 6.75 inch rear door speakers, and 8 inch behind-seat speakers, but equipment can vary. Plan on careful panel removal to avoid breaking clips or scratching trim. Check speaker depth and mounting space before choosing replacements, especially in the front doors and behind-seat locations. Mounting adapters may be needed to match the factory openings, and harness adapters can help keep the factory wiring intact. Factory amplifier details should be verified by trim and audio package. If your vehicle has the factory subwoofer, confirm the enclosure and wiring before selecting an upgrade. After installation, test each speaker one at a time to confirm polarity, balance, and full range operation before reassembling the panels.
Moderate difficulty is a fair expectation because trim removal, fitment checks, and wiring verification all matter on this truck.
Common Mistakes When Replacing Speakers
When shopping for a 2019 Toyota Tacoma audio upgrade, the biggest errors usually come from assuming every truck uses the same speaker layout or skipping trim-level verification before ordering parts.
- Buying based only on the body-style label instead of checking actual speaker locations on the vehicle. Based on generation data, this Tacoma can use different speaker counts and layouts by trim, so verify the exact setup before ordering.
- Ignoring trim and audio package differences. The trim data shows 4-, 6-, and 7-speaker systems, and factory amplifier details should be verified by trim and audio package before choosing replacement parts.
- Assuming the dash corner 2.75-inch speaker, rear door 6.75-inch speaker, or behind-seat 8-inch speaker applies to every truck without checking the vehicle first. Speaker location data is based on generation data, so verify before ordering.
- Overlooking mounting depth and connector style when selecting speakers. Even when the size looks correct, the new speaker still needs enough clearance and the right connector match for the vehicle’s wiring.
- Skipping a test fit and sound check before putting everything back together. Always confirm speaker operation, polarity, and fitment before reassembly so you do not have to reopen the panels.
- Assuming tweeters or a factory subwoofer are present in every Tacoma. Tweeters are not listed here, and a factory subwoofer is not listed, so if equipped, confirm those components before planning the upgrade.
Generation & Model Family
The 2019 Toyota Tacoma belongs to the Third generation (N300) (2016–2019) family. Nearby model years often share similar speaker locations and audio layouts, but exact fitment can vary by trim and audio package – verify before ordering.
Recommended Upgrade Path
The 2019 Toyota Tacoma uses different speaker layouts depending on equipment, and the factory audio setup can vary by trim and package. Based on generation data, the truck includes front, rear, and behind-seat speaker locations on some configurations, so the best upgrade path depends on your current system and how much change you want to make.
| Goal | Best Upgrade Path | Why |
|---|---|---|
| Better clarity | Start with the front stage by upgrading the front door speakers and dash corner speakers first. If equipped, add better tweeter-style high-frequency support through the front stage for cleaner vocals and more detailed highs. | Front speakers do most of the work for vocals and imaging, so improving them gives the biggest jump in clarity. This approach is especially useful when you want cleaner mids and highs without changing the whole system at once. |
| More bass | Add an aftermarket subwoofer to complement the factory speakers and fill in the low end. If your Tacoma has a factory subwoofer in a specific audio package, verify how it is integrated before upgrading around it. | A dedicated subwoofer handles low frequencies better than full-range speakers alone. That gives you deeper bass without asking the door speakers to do too much work. |
| Louder sound | Use properly matched speakers and amplifier integration to improve volume and reduce distortion. Factory amplifier details should be verified by trim and audio package before adding aftermarket amplifiers or changing the signal path. | Higher output only helps if the speakers and amplification are matched correctly. Verifying the factory audio setup first helps avoid weak performance, clipping, or compatibility issues. |
| Budget improvement | Replace the most-used front door speakers first, then add the dash corner speakers later if needed. Use same-size replacement speakers with correct mounting brackets. | This gives the most noticeable improvement for the least money because the front speakers carry most of the everyday listening load. It is a practical first step when you want better sound without a full system overhaul. |
| Factory look | Use same-size replacement speakers with the correct mounting brackets and harness adapters for a clean install that preserves the factory wiring and appearance. | This keeps the cabin looking original while still improving sound quality. It is a good choice if you want a subtle upgrade that blends in with the stock interior. |
Mounting Adapters and Wiring
The same nominal diameter does not guarantee a direct mount. Before ordering, confirm:
- Speaker depth: Aftermarket speakers often have larger magnets – measure available depth at each location.
- Mounting brackets: Door locations typically need a bracket or spacer to clear the window regulator and achieve correct mounting depth.
- Wiring harness adapters: Use a plug-and-play harness adapter to preserve factory wiring.
- Tweeter mounting cups: Replacing OEM tweeters may require surface-mount cups or brackets depending on the location.
- Factory or premium amplified systems: If the vehicle has a premium or factory-amplified audio system, confirm how the factory radio, amplifier, and speakers are connected before adding aftermarket amplifiers. Depending on the setup, a line output converter, DSP, integration harness, or professional installation may be needed.
- Connector type: Factory connectors vary by trim and model year – confirm compatibility before splicing or using an adapter.
Frequently Asked Questions
What size are the front door speakers in a 2019 Toyota Tacoma?
Based on generation data, the front door speakers are 6 x 9 inch full-range units. Speaker location data for 2019 should be verified before ordering, since the available layout is based on the 2018 model year in the same generation.
What size are the rear speakers in a 2019 Toyota Tacoma?
Based on generation data, the rear door speakers are 6.75 inch full-range units. Verify the exact setup before buying parts, because the speaker location information shown here is carried over from the 2018 model year in the same generation.
Does the 2019 Toyota Tacoma have a factory subwoofer?
A factory subwoofer is not listed in the available data. If equipped on a specific audio package, confirm the system before ordering replacement parts or upgrades.
Can I replace the speakers without replacing the factory radio?
Yes, speaker upgrades can be done while keeping the factory radio in place. Trim audio data shows different speaker counts and radio packages, so it is smart to match your parts to the exact trim and audio system.
Do I need mounting adapters for Tacoma speaker upgrades?
Mounting adapters may be needed depending on the speaker size and location you are replacing. The Tacoma uses multiple speaker sizes, so verify the factory opening and the new speaker dimensions before ordering hardware.
Does the 2019 Toyota Tacoma have a factory amplifier?
Factory amplifier details should be verified by trim and audio package. The available trim data lists amplifier information as N/A, so check your exact system before planning an upgrade.