2017 Toyota Tacoma Speaker Sizes and Audio System Guide
2017 Toyota Tacoma Speaker Sizes and Audio System Guide
This page summarizes the 2017 Toyota Tacoma factory speaker layout and helps you understand what to expect before planning an audio upgrade. Equipment can vary by trim, body style, or audio package, so speaker count and related features may differ across builds. Use the details here to identify the likely speaker locations, factory sizes, and any upgrade considerations for your specific Tacoma.
Data verified by Nick Marchenko, PhD
Speaker Size Chart – 2017 Toyota Tacoma
Use this table as the main reference. Fitment depends on trim, factory audio package, mounting depth, and adapter availability.
| Location | Type | Factory Size | Note |
|---|---|---|---|
| Front Door | Tweeter | 2.5 inch | if equipped |
| Front Door | Full-Range | 6 x 9 inch | |
| Rear Door | Full-Range | 6.5 inch | |
| Behind Rear Seat | Subwoofer | 8 inch | if equipped |
Generic speaker location diagram. The table above shows the specific factory sizes for this vehicle. Exact location details may vary by body style and trim.
Recommended Speakers for the 2017 Toyota Tacoma
Selected aftermarket speakers that match the factory sizes for this vehicle. Always verify mounting depth, connector type, and audio package before ordering.
6.5" Speakers
8" Speakers
Disclosure: Product links are affiliate links. We may earn a commission at no extra cost to you.
Speaker Count by Trim – 2017 Toyota Tacoma
Speaker count and audio equipment vary by trim and factory audio package. This table lists known configurations from our database.
| Trim | Speakers | Amplifier | Radio | Navigation |
|---|---|---|---|---|
| Limited V6 4x2 Double Cab 127.4 in. WB | 7 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| Limited V6 4x4 Double Cab 127.4 in. WB | 7 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR 4x2 Access Cab 127.4 in. WB | 6 | – | AM/FM stereo, seek-scan | – |
| SR 4x2 Double Cab 127.4 in. WB | 6 | – | AM/FM stereo, seek-scan | – |
| SR 4x4 Access Cab 127.4 in. WB | 6 | – | AM/FM stereo, seek-scan | – |
| SR V6 4x2 Access Cab 127.4 in. WB | 6 | – | AM/FM stereo, seek-scan | – |
| SR V6 4x4 Double Cab 127.4 in. WB | 6 | – | AM/FM stereo, seek-scan | – |
| SR5 4x2 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | – |
| SR5 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | – |
| SR5 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | – |
| SR5 V6 4x2 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x2 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| SR5 V6 4x4 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Off Road V6 4x4 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Pro V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x2 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x2 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x2 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x4 Access Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x4 Double Cab 127.4 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
| TRD Sport V6 4x4 Double Cab 140.6 in. WB | 6 | – | SiriusXM AM/FM/HD/Satellite, seek-scan | ✓ |
Data sourced from manufacturer specifications. Verify with the window sticker or dealer before ordering audio components.
Vehicle and Audio System Specifications
This block helps identify the vehicle and its audio system configuration for fitment decisions.
What Speakers Fit the 2017 Toyota Tacoma?
Aftermarket fitment should start with the factory speaker locations listed for this 2017 Toyota Tacoma, but diameter alone is not enough. Check mounting depth, bracket fit, connector type, and whether the vehicle has a premium or factory-amplified audio system. The truck uses a mix of front and rear speaker sizes, and selected audio systems may also include a tweeter or an 8-inch subwoofer if equipped. Factory amplifier details should be verified by trim and audio package.
Usually Safe Upgrades
- If your vehicle uses the front door 6 x 9 inch full-range location, look for aftermarket speakers in that size first.
- If your vehicle uses the rear door 6.5 inch full-range location, many aftermarket 6.5 inch speakers are the closest starting point.
- If your vehicle has the front door 2.5 inch tweeter location if equipped, choose a tweeter-sized replacement that matches the factory opening and wiring.
- If your vehicle has the behind-rear-seat 8 inch subwoofer if equipped, match the factory opening and enclosure requirements before buying a replacement.
Check Before Buying
- Confirm the exact speaker location on your Tacoma before ordering, since equipment can vary by audio package.
- Measure mounting depth and check for any bracket or adapter needs, especially in the front door locations.
- Verify connector style and wiring before purchase so the new speaker can be connected properly.
- If your truck has a premium audio setup, confirm how the factory system is configured before choosing replacement speakers.
- For the optional subwoofer location, make sure the replacement matches the factory enclosure space and size requirements.
Installation Notes
The 2017 Toyota Tacoma uses a speaker layout that can vary by trim and audio package, so it is best to verify the exact equipment before ordering parts. Front door locations may include 2.5 inch tweeters if equipped, along with 6 x 9 inch full-range speakers, and the rear doors use 6.5 inch full-range speakers. If your vehicle has the factory subwoofer behind the rear seat, plan for additional space and wiring checks during the install. Panel removal is usually the first step, and trim pieces should be handled carefully to avoid broken clips or scuffed surfaces. Before mounting new speakers, confirm speaker depth and basket clearance so the window track, door structure, or grille area does not interfere. Mounting adapters and harness adapters are often needed to match the factory openings and wiring. Take care with polarity and connector routing, and test each speaker before fully reassembling the panels. Factory amplifier details should be verified by trim and audio package.
Moderate difficulty, since trim-dependent audio equipment and panel access can affect the installation.
Common Mistakes When Replacing Speakers
When upgrading the 2017 Toyota Tacoma audio system, the biggest errors usually come from assuming every truck is wired the same and skipping a few key fitment checks.
- Buying based only on the body-style label instead of checking actual speaker locations on the vehicle. This Tacoma uses direct speaker-location data, and the front door tweeter is listed as if equipped, so the actual audio setup can vary by trim and package.
- Ignoring trim and audio package differences before ordering parts. Speaker count ranges from 6 to 7, and factory amplifier details should be verified by trim and audio package because the trim data does not give one universal setup.
- Choosing speakers without checking mounting depth and overall size. The listed locations include 2.5-inch tweeters if equipped, 6 x 9-inch front door full-range speakers, 6.5-inch rear door full-range speakers, and an 8-inch subwoofer behind the rear seat if equipped, so size alone is not enough.
- Overlooking connector style and wiring compatibility. Even when the speaker size matches, the factory connectors and harness layout should be confirmed before installation so the new speakers can be wired correctly.
- Skipping a test fit and sound check before putting everything back together. Always verify speaker operation, polarity, and clearance first, especially if the vehicle has the optional tweeter or subwoofer setup.
- Assuming the rear-seat subwoofer is present on every truck. The 8-inch subwoofer is listed as if equipped, so it should be confirmed on the specific vehicle before planning the upgrade or buying replacement parts.
Generation & Model Family
The 2017 Toyota Tacoma belongs to the Third generation (N300) (2016–2019) family. Nearby model years often share similar speaker locations and audio layouts, but exact fitment can vary by trim and audio package – verify before ordering.
Recommended Upgrade Path
The 2017 Toyota Tacoma uses a 6–7 speaker setup depending on trim, so upgrade results can vary by equipment package. Front-stage changes usually deliver the biggest audible improvement, especially when you want cleaner vocals and more detail. Factory amplifier details should be verified by trim and audio package before planning any speaker or amplifier upgrades.
| Goal | Best Upgrade Path | Why |
|---|---|---|
| Better clarity | Start with the front door speakers and, if equipped, the front tweeters. A front-stage upgrade usually gives the clearest improvement in vocals, detail, and overall balance. | The front speakers do most of the work for music detail, and the optional tweeters can add extra high-frequency clarity when they are part of the system. |
| More bass | If equipped with the factory behind-seat subwoofer, consider replacing or supplementing it with an aftermarket subwoofer system. If your truck does not have that setup, adding a subwoofer is the best way to extend low-end output. | Bass upgrades are most effective when low frequencies are handled separately from the main speakers, and the factory subwoofer setup should be checked before choosing an upgrade path. |
| Louder sound | Properly matched speakers and amplifier integration can improve volume and reduce distortion. Verify factory amp and premium system integration before adding aftermarket amplifiers or higher-output speakers. | Higher output only helps when the system is matched correctly, and integration matters because trim and audio package details can change how the upgrade should be planned. |
| Budget improvement | Replace the front door speakers first, then move to the rear speakers later if needed. Use same-size replacement speakers with correct mounting brackets. | The front doors carry the most important music content, so upgrading them first gives the best value without needing a full-system overhaul. |
| Factory look | Use same-size replacement speakers with the correct mounting brackets and harness adapters for a clean install that preserves the factory wiring and appearance. | This approach keeps the cabin looking original while still improving sound, and it avoids unnecessary changes to the truck’s interior layout. |
Mounting Adapters and Wiring
The same nominal diameter does not guarantee a direct mount. Before ordering, confirm:
- Speaker depth: Aftermarket speakers often have larger magnets – measure available depth at each location.
- Mounting brackets: Door locations typically need a bracket or spacer to clear the window regulator and achieve correct mounting depth.
- Wiring harness adapters: Use a plug-and-play harness adapter to preserve factory wiring.
- Tweeter mounting cups: Replacing OEM tweeters may require surface-mount cups or brackets depending on the location.
- Factory or premium amplified systems: If the vehicle has a premium or factory-amplified audio system, confirm how the factory radio, amplifier, and speakers are connected before adding aftermarket amplifiers. Depending on the setup, a line output converter, DSP, integration harness, or professional installation may be needed.
- Connector type: Factory connectors vary by trim and model year – confirm compatibility before splicing or using an adapter.
Frequently Asked Questions
What size are the front door speakers in a 2017 Toyota Tacoma?
The front door uses 6 x 9 inch full-range speakers. Some setups may also include 2.5 inch tweeters if equipped.
What size are the rear door speakers?
The rear door speaker size is 6.5 inch full-range.
Does the 2017 Tacoma have a factory subwoofer?
An 8 inch subwoofer is listed behind the rear seat if equipped. Availability can vary by trim and audio package.
Do I need mounting adapters to replace the factory speakers?
Mounting adapters may be needed depending on the speaker size and the replacement speaker design. Check the vehicle location and the new speaker’s mounting depth before ordering.
Can I replace the speakers without replacing the radio?
Yes. The speaker data shows factory speaker locations and sizes, so speaker upgrades can be planned while keeping the radio. Factory amplifier details should be verified by trim and audio package.
Does every 2017 Tacoma trim use the same audio setup?
No. Speaker count ranges from 6 to 7, and equipment can vary by trim. Some trims list navigation or different radio features, so it is best to verify the exact audio package first.