Car Sound Upgrades
Speaker sizes & fitment guides

2014 Kia Sportage Speaker Sizes and Audio System Guide

Car audio fitment guide

2014 Kia Sportage Speaker Sizes and Audio System Guide

This page outlines the factory speaker locations and what to expect when planning audio upgrades for the 2014 Kia Sportage. Equipment can vary by trim, body style, or audio package, so the exact setup may differ between vehicles. Use the trim table to compare speaker counts, check for factory amplifier details, and confirm whether tweeters are included if equipped.

Make: Kia Model: Sportage Year: 2014 Generation: Third generation (SL) - Facelift

Data verified by

Speaker Size Chart – 2014 Kia Sportage

Use this table as the main reference. Fitment depends on trim, factory audio package, mounting depth, and adapter availability.

LocationTypeFactory SizeNote
Front Door Tweeter 1 inch if equipped
Front Door Full-Range 6.5 inch
Rear Door Full-Range 6.5 inch
Far-Rear Side Panels Full-Range 8 inch
Rear Full-Range 8 inch
Generic car speaker location diagram showing front door speakers, rear speakers, tweeters, and subwoofer

Generic speaker location diagram. The table above shows the specific factory sizes for this vehicle. Exact location details may vary by body style and trim.

Recommended Speakers for the 2014 Kia Sportage

Selected aftermarket speakers that match the factory sizes for this vehicle. Always verify mounting depth, connector type, and audio package before ordering.

6.5" Speakers

See all 6.5" car speakers →

8" Speakers

See all 8" car speakers →

Disclosure: Product links are affiliate links. We may earn a commission at no extra cost to you.

Speaker Count by Trim – 2014 Kia Sportage

Speaker count and audio equipment vary by trim and factory audio package. This table lists known configurations from our database.

TrimSpeakersAmplifierRadioNavigation
EX 4dr All-wheel Drive 7 std
EX 4dr Front-wheel Drive 7 std
SX 4dr All-wheel Drive 7 std
SX 4dr Front-wheel Drive 7 std
LX 4dr All-wheel Drive 6
LX 4dr Front-wheel Drive 6

Data sourced from manufacturer specifications. Verify with the window sticker or dealer before ordering audio components.

Vehicle and Audio System Specifications

This block helps identify the vehicle and its audio system configuration for fitment decisions.

MakeKia
ModelSportage
Year2014
GenerationThird generation (SL) - Facelift (2014–2016)
Body StylesCrossover, SUV
Front Door – Tweeter1 inch (if equipped)
Front Door – Full-Range6.5 inch
Rear Door – Full-Range6.5 inch
Far-Rear Side Panels – Full-Range8 inch
Rear – Full-Range8 inch
Speaker Count Range6–7 speakers (varies by trim)
Factory AmplifierAvailable on some trims (see trim table)

Crossover vs SUV – Audio Differences

This model is offered in more than one body style, and audio equipment can vary by configuration. Since no body-style-specific speaker data is listed, rear speaker placement, speaker count, and factory audio packages should be verified by trim and equipment. Tweeters may be included if equipped, and factory amplifier details should be checked by audio package.

What Speakers Fit the 2014 Kia Sportage?

Aftermarket fitment should start with the factory speaker locations listed above, but diameter alone is not enough. Check mounting depth, bracket fit, connector type, and whether the vehicle has a premium or factory-amplified audio system. This 2014 Kia Sportage uses 6.5-inch full-range speakers in the front and rear doors, with 8-inch full-range speakers in the far-rear side panels and rear position. A 1-inch tweeter may also be present if equipped, so confirm the exact audio layout before ordering.

Usually Safe Upgrades

  • If your vehicle uses the front door 6.5-inch location, a quality 6.5-inch full-range replacement is the most straightforward starting point.
  • If your vehicle uses the rear door 6.5-inch location, a matching 6.5-inch full-range speaker is a common upgrade path.
  • If your vehicle uses the far-rear side panel 8-inch location, look for an 8-inch full-range speaker that matches the factory opening and depth.
  • If your vehicle uses the rear 8-inch location, an 8-inch full-range replacement can work well when the mounting and connector details line up.
  • If equipped with front door tweeters, a 1-inch tweeter upgrade may also be possible, but the fit should be verified carefully.

Check Before Buying

  • Confirm the exact speaker location and size before ordering, since the Sportage can use different speaker counts by trim.
  • Verify whether your vehicle has the 6-speaker or 7-speaker audio setup, because trim and audio package can change the system layout.
  • Measure mounting depth and check for any factory bracket or adapter requirements, especially at the 8-inch locations.
  • Inspect the connector style on the factory speaker so you can match the replacement or plan for an adapter.
  • Factory amplifier details should be verified by trim and audio package before choosing speakers or tuning the system.

Installation Notes

Installing replacement speakers in the 2014 Kia Sportage usually starts with careful panel removal at the front or rear doors, then checking the factory wiring before disconnecting anything. The front door openings may use 6.5-inch speakers, and the front door tweeter is listed if equipped, so confirm the exact audio setup before ordering parts. Some trims also use 8-inch speakers in the far-rear side panels or rear location, so speaker size should be matched to the position being serviced. Because factory audio equipment can vary by trim and audio package, verify whether your vehicle has the standard setup or an amplified system before choosing parts. Use the correct harness adapters to avoid cutting factory wiring, and check speaker depth and mounting clearance before final installation. Mounting adapters may be needed to secure aftermarket speakers properly, especially when the replacement speaker frame or depth differs from the original. Always test polarity, balance, and fade before reinstalling the panels. If your vehicle has the factory subwoofer, confirm compatibility before replacing or bypassing it.

Moderate difficulty, since panel removal, wiring verification, and speaker depth checks are important for a clean installation.

Speaker installation steps: remove panel, unplug wiring, check depth, mount adapter, connect harness, test audio

Common Mistakes When Replacing Speakers

When shopping for audio upgrades on the 2014 Kia Sportage, the biggest problems usually come from assuming every trim and audio package is the same.

  • Buying based only on the body-style label instead of checking actual speaker locations on the vehicle.
  • Skipping trim and audio package verification, even though speaker count and amplifier setup can vary by trim.
  • Assuming the front door tweeters are always present instead of confirming whether they are equipped on the specific vehicle.
  • Ignoring mounting depth and speaker size differences, especially with the 6.5-inch and 8-inch locations listed for this model.
  • Not checking connector style and wiring before ordering parts, which can lead to avoidable installation delays.
  • Reassembling the doors or panels before testing every speaker location and confirming the new audio setup works correctly.

Generation & Model Family

The 2014 Kia Sportage belongs to the Third generation (SL) - Facelift (2014–2016) family. Nearby model years often share similar speaker locations and audio layouts, but exact fitment can vary by trim and audio package – verify before ordering.

2014 2015 2016

Recommended Upgrade Path

The 2014 Kia Sportage uses a 6–7 speaker setup depending on trim, and equipment can vary across the lineup. Front-stage upgrades are usually the best starting point for clearer sound, while larger system changes make sense if you want more output or stronger low end. Factory amplifier details should be verified by trim and audio package before planning bigger upgrades.

GoalBest Upgrade PathWhy
Better clarity Start with the front door speakers and, if equipped, the front tweeters to improve vocals, detail, and stereo imaging before moving to the rear speakers. The front stage does the most work in daily listening, so upgrading it first gives the biggest improvement in clarity and high-frequency detail.
More bass Add an aftermarket subwoofer to complement the factory speakers and give the system stronger low-end output. A dedicated subwoofer is the most effective way to add bass without relying on the door speakers to handle deep low frequencies.
Louder sound Properly matched speakers and amplifier integration can improve volume and reduce distortion. Verify factory amp and premium system integration before adding aftermarket amplifiers. Higher output works best when the speakers and amplification are matched correctly, especially in vehicles where audio equipment can vary by trim.
Budget improvement Replace the front door speakers first with same-size replacement speakers with correct mounting brackets. The front doors are the most-used speakers in the cabin, so this is usually the most cost-effective way to improve everyday sound quality.
Factory look Use same-size replacement speakers with the correct mounting brackets and harness adapters for a clean install that preserves the factory wiring and appearance. This approach keeps the interior looking original while still allowing a meaningful audio upgrade.

Mounting Adapters and Wiring

The same nominal diameter does not guarantee a direct mount. Before ordering, confirm:

  • Speaker depth: Aftermarket speakers often have larger magnets – measure available depth at each location.
  • Mounting brackets: Door locations typically need a bracket or spacer to clear the window regulator and achieve correct mounting depth.
  • Wiring harness adapters: Use a plug-and-play harness adapter to preserve factory wiring.
  • Tweeter mounting cups: Replacing OEM tweeters may require surface-mount cups or brackets depending on the location.
  • Factory or premium amplified systems: If the vehicle has a premium or factory-amplified audio system, confirm how the factory radio, amplifier, and speakers are connected before adding aftermarket amplifiers. Depending on the setup, a line output converter, DSP, integration harness, or professional installation may be needed.
  • Connector type: Factory connectors vary by trim and model year – confirm compatibility before splicing or using an adapter.

Frequently Asked Questions

What size are the front door speakers in a 2014 Kia Sportage?

The front door uses 6.5-inch full-range speakers. A 1-inch tweeter may also be present if equipped.

What size are the rear speakers?

The rear door speakers are 6.5-inch full-range units. The vehicle also lists 8-inch full-range speakers in the far-rear side panels and rear area.

Does the 2014 Kia Sportage have a factory subwoofer?

A factory subwoofer is not listed in the available data. If you are checking a specific trim or audio package, verify the equipment before ordering parts.

Do I need mounting adapters for speaker replacement?

Mounting adapters may be needed depending on the speaker location and the replacement speaker’s design. The factory openings include 6.5-inch and 8-inch locations, so fitment should be matched carefully.

Can I replace the speakers without replacing the radio?

Yes, speaker replacement can be done without changing the radio. The factory radio can stay in place, but speaker choice should match the vehicle’s speaker locations and trim-specific audio setup.

Does the factory amplifier vary by trim?

Yes, factory amplifier details should be verified by trim and audio package. The available data shows amplifier equipment can vary, so check the specific trim before planning an upgrade.

N

Nick Marchenko, PhD

Car Audio Data Specialist & Technical Editor

Nick proof-checks every speaker-size page on this site against manufacturer documentation, verified fitment databases, and OEM trim-level specifications. He reviews factory speaker locations, audio package details, amplifier configurations, and mounting constraints to ensure the data you see reflects what actually ships in the vehicle – not approximations. With a background in electrical engineering and over a decade of hands-on car audio work, he flags any data inconsistencies before a page goes live.

More by Nick →