Car Sound Upgrades
Speaker sizes & fitment guides

2013 Kia Sportage Speaker Sizes and Audio System Guide

Car audio fitment guide

2013 Kia Sportage Speaker Sizes and Audio System Guide

This page covers the factory speaker locations, the original equipment layout, and practical upgrade notes for the 2013 Kia Sportage. Equipment can vary by trim, body style, or audio package, so speaker count and audio hardware should be verified against the specific vehicle. Use this guide to understand what may be installed and what to check before choosing replacement speakers or planning an audio upgrade.

Make: Kia Model: Sportage Year: 2013 Generation: Third generation (SL)

Data verified by

Speaker Size Chart – 2013 Kia Sportage

Use this table as the main reference. Fitment depends on trim, factory audio package, mounting depth, and adapter availability.

LocationTypeFactory SizeNote
Front Door Tweeter 1 inch if equipped
Front Door Full-Range 6.5 inch
Rear Door Full-Range 6.5 inch
Far-Rear Side Panels Full-Range 8 inch
Rear Full-Range 8 inch
Generic car speaker location diagram showing front door speakers, rear speakers, tweeters, and subwoofer

Generic speaker location diagram. The table above shows the specific factory sizes for this vehicle. Exact location details may vary by body style and trim.

Recommended Speakers for the 2013 Kia Sportage

Selected aftermarket speakers that match the factory sizes for this vehicle. Always verify mounting depth, connector type, and audio package before ordering.

6.5" Speakers

See all 6.5" car speakers →

8" Speakers

See all 8" car speakers →

Disclosure: Product links are affiliate links. We may earn a commission at no extra cost to you.

Speaker Count by Trim – 2013 Kia Sportage

Speaker count and audio equipment vary by trim and factory audio package. This table lists known configurations from our database.

TrimSpeakersAmplifierRadioNavigation
EX 4dr All-wheel Drive 7 std
EX 4dr Front-wheel Drive 7 std
SX 4dr All-wheel Drive 7 std
SX 4dr Front-wheel Drive 7 std
Base 4dr Front-wheel Drive 6
LX 4dr All-wheel Drive 6 opt
LX 4dr Front-wheel Drive 6 opt

Data sourced from manufacturer specifications. Verify with the window sticker or dealer before ordering audio components.

Vehicle and Audio System Specifications

This block helps identify the vehicle and its audio system configuration for fitment decisions.

MakeKia
ModelSportage
Year2013
GenerationThird generation (SL) (2011–2013)
Body StylesCrossover, SUV
Front Door – Tweeter1 inch (if equipped)
Front Door – Full-Range6.5 inch
Rear Door – Full-Range6.5 inch
Far-Rear Side Panels – Full-Range8 inch
Rear – Full-Range8 inch
Speaker Count Range6–7 speakers (varies by trim)
Factory AmplifierAvailable on some trims (see trim table)

Crossover vs SUV – Audio Differences

This model is offered in more than one body style, and equipment can vary by configuration. Since no body-style-specific speaker data is listed, rear speaker placement and factory audio packages should be verified by trim and audio option. Speaker count ranges from 6 to 7, and tweeters may be included if equipped.

What Speakers Fit the 2013 Kia Sportage?

Aftermarket fitment should start with the factory speaker locations listed above, but diameter alone is not enough. Check mounting depth, bracket fit, connector type, and whether the vehicle has a premium or factory-amplified audio system. This 2013 Kia Sportage uses a mix of 6.5-inch and 8-inch locations, with 1-inch tweeters if equipped. Speaker count can vary by trim, so verify the exact audio package before ordering replacement speakers.

Usually Safe Upgrades

  • If your vehicle uses the 6.5-inch front door location, many aftermarket 6.5-inch full-range speakers are the first place to start.
  • If your vehicle uses the 6.5-inch rear door location, 6.5-inch full-range replacements are usually the most straightforward option to compare.
  • If your vehicle uses the 8-inch far-rear side panel location, look for 8-inch full-range speakers that match the factory opening and mounting pattern.
  • If equipped with 1-inch front door tweeters, replacement tweeters should be matched carefully to the factory location and audio system.

Check Before Buying

  • Confirm the exact speaker location and size on your Sportage, since trim and audio equipment can vary.
  • Measure mounting depth and check the factory opening before choosing any replacement speaker.
  • Verify connector style and any adapter needs so the new speaker can connect properly.
  • Factory amplifier details should be verified by trim and audio package before selecting speakers.
  • If your vehicle has a factory subwoofer, confirm the enclosure and speaker size before shopping for a replacement.

Installation Notes

The 2013 Kia Sportage uses 6 to 7 speakers depending on trim, so confirm the factory audio layout before ordering parts. Front door 6.5-inch speakers and rear door 6.5-inch speakers are listed, and some setups also include 1-inch front door tweeters if equipped. Other listed locations include 8-inch speakers in the far-rear side panels and rear area, so check each opening carefully before choosing replacements. Panel removal is required at the doors and any rear side locations, and you should work slowly to avoid breaking clips or scratching trim. Wiring adapters are recommended so you do not cut the factory harness, and mounting adapters may be needed to match the original speaker openings. Speaker depth should also be checked, especially in the doors and rear side panels, to make sure the new speakers clear the window track and trim. If your vehicle has the factory subwoofer, verify that location separately before planning upgrades. Test every speaker after installation to confirm polarity and balance.

Moderate difficulty, since access, trim removal, and fitment checks can vary by trim and audio package.

Speaker installation steps: remove panel, unplug wiring, check depth, mount adapter, connect harness, test audio

Common Mistakes When Replacing Speakers

When upgrading the 2013 Kia Sportage audio system, the biggest problems usually come from assuming every vehicle is wired the same way.

  • Buying based only on the body-style label instead of checking actual speaker locations on the vehicle.
  • Skipping trim and audio package checks, even though speaker count and amplifier setup can vary by trim.
  • Assuming the front door tweeter is present without verifying it, since it is only listed if equipped.
  • Ignoring mounting depth and speaker size differences, especially with the 6.5-inch and 8-inch locations in the vehicle.
  • Overlooking connector style and wiring differences before ordering parts, which can lead to installation delays or extra adapter needs.
  • Reassembling everything before testing the new speakers and audio output, which makes it harder to catch wiring or balance issues early.

Generation & Model Family

The 2013 Kia Sportage belongs to the Third generation (SL) (2011–2013) family. Nearby model years often share similar speaker locations and audio layouts, but exact fitment can vary by trim and audio package – verify before ordering.

2011 2012 2013

Recommended Upgrade Path

The 2013 Kia Sportage uses a 6–7 speaker setup depending on trim, and equipment can vary across the lineup. Front-stage upgrades are usually the best starting point for cleaner sound, while bass and volume gains depend on how the system is configured. Factory amplifier details should be verified by trim and audio package before planning larger changes.

GoalBest Upgrade PathWhy
Better clarity Upgrade the front door speakers first, and if equipped, replace the front tweeters at the same time for a cleaner front soundstage. Clarity improvements usually come from the front of the cabin, where vocals and detail are most noticeable. A stronger front stage helps tighten mids and highs without needing a full-system overhaul.
More bass Add an aftermarket subwoofer to complement the factory speakers and fill in the low end. The listed speaker layout does not include a factory subwoofer, so adding one is the most direct way to increase low-frequency output and reduce strain on the door speakers.
Louder sound Properly matched speakers and amplifier integration can improve volume and reduce distortion. Verify factory amp and premium system integration before adding aftermarket amplifiers. Higher output only works well when the speakers and amplification are matched correctly. Checking the existing audio package first helps avoid integration problems and keeps the system sounding clean at higher volume.
Budget improvement Replace the front door speakers first with same-size replacement speakers with correct mounting brackets. The front doors handle the most important everyday listening, so this gives the best value for the money. It is a practical way to improve sound without changing the entire system at once.
Factory look Use same-size replacement speakers with the correct mounting brackets and harness adapters for a clean install that preserves the factory wiring and appearance. This approach keeps the cabin looking original while still improving sound quality. It also helps maintain the factory wiring layout and avoids visible changes to the interior.

Mounting Adapters and Wiring

The same nominal diameter does not guarantee a direct mount. Before ordering, confirm:

  • Speaker depth: Aftermarket speakers often have larger magnets – measure available depth at each location.
  • Mounting brackets: Door locations typically need a bracket or spacer to clear the window regulator and achieve correct mounting depth.
  • Wiring harness adapters: Use a plug-and-play harness adapter to preserve factory wiring.
  • Tweeter mounting cups: Replacing OEM tweeters may require surface-mount cups or brackets depending on the location.
  • Factory or premium amplified systems: If the vehicle has a premium or factory-amplified audio system, confirm how the factory radio, amplifier, and speakers are connected before adding aftermarket amplifiers. Depending on the setup, a line output converter, DSP, integration harness, or professional installation may be needed.
  • Connector type: Factory connectors vary by trim and model year – confirm compatibility before splicing or using an adapter.

Frequently Asked Questions

What size are the front door speakers in a 2013 Kia Sportage?

The front door uses 6.5-inch full-range speakers. A 1-inch tweeter may also be present if equipped. Speaker layout can vary by trim and audio package.

What size are the rear speakers in a 2013 Kia Sportage?

Rear door speakers are 6.5-inch full-range units. Some setups also include 8-inch full-range speakers in the far-rear side panels and rear area, depending on the audio system.

Does the 2013 Kia Sportage have a factory subwoofer?

A factory subwoofer is not listed in the available data. If your vehicle has one, it should be verified by trim and audio package before ordering parts.

Do I need mounting adapters for speaker replacement?

Mounting adapters may be needed because the Sportage uses multiple speaker sizes and locations. Check the exact speaker position and trim before choosing replacement hardware.

Can I replace the speakers without replacing the radio?

Yes, speaker replacement can be done without changing the radio. The best match depends on the factory speaker sizes and whether your vehicle has the optional tweeter or other audio equipment.

Does the 2013 Kia Sportage have a factory amplifier?

Factory amplifier details should be verified by trim and audio package. Some trims list an amplifier, while others do not, so the audio setup is not the same across all versions.

N

Nick Marchenko, PhD

Car Audio Data Specialist & Technical Editor

Nick proof-checks every speaker-size page on this site against manufacturer documentation, verified fitment databases, and OEM trim-level specifications. He reviews factory speaker locations, audio package details, amplifier configurations, and mounting constraints to ensure the data you see reflects what actually ships in the vehicle – not approximations. With a background in electrical engineering and over a decade of hands-on car audio work, he flags any data inconsistencies before a page goes live.

More by Nick →